
Wintime (R) Utility Disk
Copyright (C) Wintime Technology Inc. 1988-1995.

Directories and files list for your utility disk as follows:

           \PENPOINT

           README
           BOOT\MIL.INI

Description
===========

      * File README
        The file you are reading.

      * File BOOT\MIL.INI
        Tablet initial file for PenPoint system.

Installation
============

         The steps are:

         1. First you have to install the whole PenPoint SDK system.
            The system will be established under the directory
            C:\PENPOINT\BOOT. Under PENPOINT\BOOT directory, there
            exists a initial file MIL.INI.

            Concerning to install the PenPoint SDK, please refer to the
            manual of PenPoint SDK.

         2. Please copy the MIL.INI file in diskette (packed with tablet)
            onto the directory C:\PENPOINT\BOOT to replace the initial one.

            Before starting the driver, we suggest you insert the following
            lines into your AUTOEXEC.BAT file.

            call  pointset
            cd\penpoint\boot

         3. And create a file named POINTSET.BAT containing the following lines.

            PATH=C:\PENPOINT\SDK\UTIL\DOS;c:\dos
            SET INCLUDE=.;C:\PENPOINT\SDK\INC
            SET LIB=C:\PENPOINT\SDK\LIB
            SET PENPOINT_PATH=C:\PENPOINT

         4. If you want to appoint the port of your serial pointing device,
            correct the " UniPenPort = X " line in MIL.INI file. (X=1 or 2
            and the default is 1)

         5. Power on or reset to re-start the PC system

         6. Under DOS prompt, type GO and hit "return" key to execute the
            PenPoint.

         7. Now you can use tablet under PenPoint system as a pen-based
           input device.


End of file.
